AquaShield NanoPrimer

Waterproofing primer for interior and exterior use

DESCRIPTION

AquaShield NanoPrimer is an aqueous primer with a particle size of the order of 30nm, high penetrating ability and enhanced waterproofing. After applying it to an absorbent substrate, it makes it compact without, however, creating a surface film. Τhereby, it increases the accretion of dyes, tile adhesive and cement mortars to absorbent surfaces, resulting in a uniform dyeing and at the same time enhanced waterproofing. At the same time, AquaShield NanoPrimer improves the elasticity of the substrate by preventing micro-cracks.

APPLICATION NOTES

The surfaces must be clean and free of any type of dirt (dust, oil, grease, rust, soap, etc.) and absolutely dry. Aquashield Porus is ready to use. Apply the material to the surface with a brush, roller or spray. Allow the surface to dry and then apply the dye. Tools and containers used should be washed immediately with clean water.

Available

Packages

1L

3L

20L

1000L

Performance

12m/L depending on the surface's absorption and porosity

2

Characteristics

  • High penetrating ability

  • Increased adhesion of the dye to the substrate

  • Reinforcement of old surfaces

  • Water repellency

  • Protection from mold and fungi  

Reports

VISIT US

21 El. Venizelou Str., Melissia, Athens, Greece, GR 15127

CONTACT US

T: 0030-2169004480

info@nanoviis.com

Products that are developed and produced in Greece

Copyright © 2019 NanoViis

All Rights Reserved