for interior and exterior use
NanoPrimer C is a water based nanoprimer with a particle size of 30nm and high penetration ability. When applied on absorbent surfaces, it makes the substrate solid without creating a superficial membrane. In that way, the substrate achieves
improved adhesion ability before painting, tiling and rendering. At the same time, a uniform painting is achieved, with better substrate elasticity, avoiding the development of micro-cracks.
Shake well before the use. The surfaces should be dry and free from dust, fats, varnishes and waxes. For a specific volume of NanoPrimer C, dilute by adding 1 volume part of water (for porous masonry sunstrates) or 3 volume parts of water (for paint covered surfaces). Apply with brush, roller or spray. Application temperature should be between 5 - 35°C. Allow the surface to dry and then apply paint. Tools and containers should be cleaned immediately.
12m/L depending on the surface's absorption and porosity
High penetration ability in porous surfaces due to its nanostructure
Increase of the adhesion and the performance of the colour
Reinforcement of old surfaces
Improvement of the appearance of the top coat
New porous masonry surfaces
Paint covered porous surfaces