Nanoxsol S

Water-based cleaner for salts

DESCRIPTION

Nanoxsol S is a biodegradable water based detergent for salts. Thanks to its advanced composition, it dissolves and cleanses salts and residues from soaps and sea water from any surface other than marble without affecting it and damaging it. Thanks to its advanced composition, it can also clean stains along with salts. It does not contain allergens, ammonia, petroleum derivatives and acids, as is the case in most common salt cleansers, and is therefore human and environment friendly. Nanoxsol S is suitable for use throughout the home, such as in the living room, in the bathroom, in the garden. In particular, it can be applied to faucets, showers, tiles, bathroom accessories, stainless steel accessories, iron steams and coffee machines. It is suitable for cleaning salts in clay pots and tiles without altering their surface. It can be used in the stainless steel parts of the boats by removing the salts from them and maintaining their glowing action.

APPLICATION NOTES

Shake well before use. Apply with brush, roller or spray. Brush slightly and allow the material to act for about 10 minutes. Then clean with water. In the event of old stains, it is advisable to heat the liquid at 40-50°C to get better results. Repeat the procedure if there is a large amount of salt.

Available Packages

1L

4L

20L

1000L

Performance

6-8 m/L depending on the surface's porosity and absorption and the type of the pollutant

2

Suitable for

  • Salts

  • Soap residues

  • Sea water

Reports

VISIT US

21 El. Venizelou Str., Melissia, Athens, Greece, GR 15127

CONTACT US

T: 0030-2169004480

info@nanoviis.com

Products that are developed and produced in Greece

Copyright © 2019 NanoViis

All Rights Reserved