top of page

Application Surfaces

Bare concrete floor, Exterior walls, Interior walls

Available Packages

Plastic Bottles/Barrels 1L, 3L, 10L, IBC 1000L

Nanoprimer C

Primer for porous surfaces, suitable for water borne and solvent borne paints


Nanoprimer C is a one-part water based nanoprimer with a particle size of 30nm and high penetrating capacity. When applied on absorbent surfaces, it strengthens the substrate without creating a superficial membrane film. The substrate achieves improved adhesion quality before painting, tiling or rendering and acquires better elasticity thus avoiding the development of micro-cracks and an even, uniform finish is achieved.


Shake well before use. The substrate surface should be dry and free from dust, dirt, oils, varnishes and waxes. Remove all loose, flaking and unstable material. Ensure that any paint materials left remaining are removed and the underlying substrate is sound and adhering well. For new porous surfaces add 1 part water to specified quantity of Nanoprimer C. For previously painted surfaces add 3 parts water to specified quantity of Nanoprimer C. Apply with brush, roller or low-pressure spray gun. Ambient temperature during application 5 - 35°˚C. Allow surface to dry and then apply paint. Tools and containers should be washed immediately with clean water.

To obtain the Technical Data Sheet or the Safety Data Sheet of the product please fill in the following form:
Choose which data sheet you want to be sent to you via email:

Your message has been received. The requested data sheets will be emailed to you soon.

bottom of page