top of page
Porus.png

Application Surfaces

Bare concrete floor, Cement, Ceramic surfaces, Exterior walls,Interior walls, Joint, Marble, Roof, Stone, Tiles

Available Packages

Plastic Bottles/Barrels 1L, 4L, 20L, IBC 1000L

Nanoxsol G

For removing and cleaning oils and dirt from surfaces

Description

Nanoxsol G is a water based cleaner. Due to its advanced composition, Nanoxsol G dissolves and removes oils, engine grease, crude oil, diesel/petrol fuel, dirt and organic waste residue from any surface without altering or modifying it. Nanoxsol G does not contain ammonium, phosphate salts, petroleum byproducts, or acid making it safe and friendly to people and the environment.

Application

Shake well before use. The substrate surface should be dry, free of dust and loose, flaking material. Nanoxsol G is ready for use. Newly constructed surfaces must be allowed to dry out. Apply with brush, roller or low-pressure spray gun. Allow 10 minutes after application (gently scrub surface with a brush if needed) before rinsing with plenty of clean water. Repeat if necessary.

To obtain the Technical Data Sheet or the Safety Data Sheet of the product please fill in the following form:
Choose which data sheet you want to be sent to you via email:

Your message has been received. The requested data sheets will be emailed to you soon.

bottom of page